Focus on heavy equipment
Focus on heavy equipment
Bentonite dryer is mainly used for the drying of various types of clay mud, such as bentonite, kaolin, aluminum and iron clay, and solves some problems of sticking, crushing and drying.
Bentonite dryer is mainly used for the drying of various types of clay mud, such as bentonite, kaolin, aluminum and iron clay, and solves some problems of sticking, crushing and drying.
Bentonite Clay Dryer is specially designed to dry the wet bentonite, and it is one kind of rotary drum dryer, mainly used for the drying of various types of clay mud, such as bentonite, kaolin, diatomite, aluminum and iron clay. Bentonite is a water-bearing clay mineral material mainly composed of montmorillonite. Because of its special nature, such as swelling, adhesion, adsorption, catalytic, thixotropy, suspension, and cation exchange, bentonite is widely used in various industrial fields. Before being applied in various industries, bentonite must be dried in a bentonite dryer before it can be used. Jiutian® bentonite dryer is produced based on traditional technical upgrading. Compared with traditional bentonite dryers, our bentonite dryer holds a larger stuffing rate, the residence time is greatly reduced and the capacity of the bentonite dryer is greatly improved. Through the drying treatment with bentonite drying equipment, the moisture content of bentonite can be reduced, thereby enhancing its stability and plasticity, making it more suitable for various industrial applications.
Bentonite Clay Dryer is widely used for drying bentonite, kaolin, clay, soil, diatomite, bauxite, etc.
After the wet bentonite enters the drying drum, it is divided into the following working areas: the first is the material guiding area, where the wet material comes into contact with high-temperature hot air and the moisture evaporates quickly; the second is the material picking and cleaning area, where the wet material is picked up by the picking plate to form a material curtain. The equipment is equipped with a cleaning device to clean the material adhering to the inner wall, and the clumped material balls are also broken up, thereby increasing the heat exchange area and improving the drying rate; the third is the inclined lifting plate area, where the wet material is always in a low-humidity loose state, and there is no material adhesion. After sufficient heat exchange, the material reaches the required moisture state; the fourth is the unloading area, where the drum is not equipped with a picking plate, and the material rolls and slides to the discharge port in this area to complete the drying.
GET QUOTE
| Equipment | Output (T/D) | Moisture content of raw material (%) | Final moisture content (%) | Total Power (kw) | Spatial footprint (m²) |
|---|---|---|---|---|---|
| JTHG1916 | 300 | 20-40 | 3-15 | 120 | 8*26 |
| JTHG2218 | 500 | 20-40 | 3-15 | 160 | 10*35 |
| JTHG2520 | 700 | 20-40 | 3-15 | 200 | 10*40 |
| JTHG2820 | 1000 | 20-40 | 3-15 | 290 | 12*40 |
| JTHG3430 | 1500 | 20-40 | 3-15 | 420 | 15*46 |
| JTHG4032 | 2000 | 20-40 | 3-15 | 500 | 15*50 |
| Note: The production capacity of the equipment is directly related to the proportion of mineral slag to reduce the moisture, the precipitation ratio is large, and the equipment production capacity is reduced accordingly. Specific consulting firm. | |||||
Custom design production solutions? Get a quote? Get product details? Leave us a message and we'll get back to you within 24 hours.
