Focus on heavy equipment
Kaolin clay dryer is mainly composed of rotating body, lifting plate, transmission device, support device and sealing ring and other components. The Jiutian kaolin dryer adopts a new type of lifting plate device, which has many functions such as guiding, equalizing, and lifting, so that the kaolin can be evenly distributed in the radial section of the dryer, and the material curtain becomes thin, uniform and complete. Complete contact with hot air flow to achieve the purpose of making full use of thermal energy.
1. There are various ways of contacting kaolin with the heat source, such as radiation, convection, conduction, etc., which greatly improves the drying efficiency.
2. The kaolin dryer is automatically controlled by computer, which can realize remote control and easy operation. According to drying requirements.
3. The kaolin clay dryer can be configured with different drying temperature and drying time to realize drying automation.
4. The material runs smoothly through the resistance of the cylinder, the operation is convenient, the failure is less, the maintenance cost is low, and the power consumption is low.
After the kaolin material enters the inside of the dryer cylinder, it is dried in co-current or counter-current contact with the hot air passing through the kaolin dryer cylinder or in effective contact with the heated wall surface. During the drying process, the kaolin is dried by means of the kaolin dryer. The slow rotation of the cylinder moves from the higher end to the lower end under the action of gravity. The inner wall of the kaolin dryer is equipped with a forward copy board, which continuously picks up and sprinkles the material, which greatly enhances the thermal contact surface of the material, prevents the wet material from sticking, improves the drying rate and promotes the material to move forward. , the qualified kaolin after drying is discharged from the lower part of the other end.
Jiutian kaolin dryer is suitable for drying kaolin, clay, bentonite, diatomite and other raw materials. Zhengzhou Jiutian is a manufacturer of kaolin dryers with affordable prices, if you are interested in our machine, please feel free to contact us.
Silica sand if mainly composed of SiO2, which has good wear resistance, fire resistance, and insulation properties. It is widely used in glass, casting, ceramics, refractory materials, metallurgy and other industries. However, natural silica sand contains
Nickel ore is an important raw material for producing batteries and stainless steel. However, with the resources of sulfide nickel ore decreasing, currently the nickel ore primarily comes from laterite nickel ore. Laterite nickel ore has a high moisture c
The rotary sludge drying system is specifically designed for sludge with high moisture content, high viscosity, and low calorific value, it is usually used in sludge treatment in municipal, dyeing, and papermaking industries. After dewatering by a filter
Aggregates are used for skeleton and filling in concrete and mortar, including fine aggregates with a diameter of 0.16-5mm and coarse aggregates with a diameter bigger than 5mm. The sand, gravel, and crushed stone commonly found in our daily lives can all