Focus on heavy equipment
Mineral refers to the waste generated in the industrial process. It is difficult to handle and utilize because it contains a lot of water. In order to solve the problem of slag treatment, mineral slag dryer came into being.
The mineral slag dryer adopts advanced heating and drying technology, which can quickly evaporate and remove the moisture in the slag, greatly improving the drying efficiency of the slag. At the same time, the dryer is equipped with a double-layer drum and a hot air circulation system to achieve the effect of uniform heating and rapid evaporation, ensuring that the slag is fully dried in a short time. The slag dryer fully considers environmental factors during the drying process and adopts an efficient dust prevention device to effectively prevent the overflow of dust. At the same time, the dryer is equipped with an exhaust gas treatment system to purify the generated exhaust gas and ensure the good state of the ecological environment. The slag dryer is not only suitable for the drying of slag, but also can be used for the drying of other granular materials, such as sand, gravel, coal slag, etc.
Mineral slag dryer plays an important role in the field of slag treatment. Its high-efficiency drying function, environmental protection and high efficiency, multi-functionality and reasonable structure make the dryer a powerful assistant in engineering construction.
Silica sand if mainly composed of SiO2, which has good wear resistance, fire resistance, and insulation properties. It is widely used in glass, casting, ceramics, refractory materials, metallurgy and other industries. However, natural silica sand contains
Nickel ore is an important raw material for producing batteries and stainless steel. However, with the resources of sulfide nickel ore decreasing, currently the nickel ore primarily comes from laterite nickel ore. Laterite nickel ore has a high moisture c
The rotary sludge drying system is specifically designed for sludge with high moisture content, high viscosity, and low calorific value, it is usually used in sludge treatment in municipal, dyeing, and papermaking industries. After dewatering by a filter
Aggregates are used for skeleton and filling in concrete and mortar, including fine aggregates with a diameter of 0.16-5mm and coarse aggregates with a diameter bigger than 5mm. The sand, gravel, and crushed stone commonly found in our daily lives can all