Focus on heavy equipment

Sand Rotary Dryer

Sand Rotary Dryer

  • Capacity: 6-100 t/h
  • Power 4-18.5kw

Sand rotary dryer is generally suitable for granular materials and can be used for drying silica sand, river sand, artificial sand, dry-mixed mortar, quartz sand, aggregates, iron dry powder, limestone, etc.

Leave Us A Message

Sand Dryer is also known as triple pass rotary drum dryer, is developed and manufactured on the basis of single drum dryer. It increases the drying time of wet raw materials. In terms of tightness and thermal insulation, the triple-pass rotary drum sand dryer is more reasonable than the single-pass rotary drum sand dryer. In terms of production capacity, the triple-pass rotary drum sand dryer is more than 60% higher than the single-cylinder dryer.

Sand dryer can be used for the drying of silica sand, river sand, quartz sand, frac sand, dry-mixed mortar, ash, aggregate, limestone, etc. Widely used in dry-mixed mortar industry, cement, building materials, glass, foundry industry, chemical industry. The heating source can be coal, biomass, oil and gas, etc.

Sand Rotary Dryer
Sand Rotary Dryer
Sand Rotary Dryer

APPLIED MATERIALS

Sand dryer can be used for drying silica sand, river sand, dry mixed mortar, artificial sand, frac sand, limestone, aggregate, etc.

Sand Rotary Dryer material diagram

   Conveyed by belt conveyor or bucket elevator to the hopper, the sand comes into the feeding end of the dryer by a feeding device through a feeding pipe; the obliquity of the feeding pipe should be greater than that of the sand, so the sand can slip into the dryer easily; the wet sand and hot air can enter into the dryer from the same feeding end of the dryer, which is called co-current air flow drying process; or they can be fed into the dryer from different ends of the dryer, which is called count-current air flow drying process; as the dryer rotates, the sand inside moves forward from the feeding end to the discharging end of the dryer, and during this time, wet sand is being dried by the hot air; then dried materials are discharged and conveyed away by belt conveyor or screw conveyor.

GET QUOTE

- ADVANTAGE

Wechat/WhatsApp: +86 156-1759-1790

1. The sand dryer is made of alloy steel plate manufacturing,the wear-resisting 3-4 times of ordinary steel , the service life of the equipment is more than 10 years.

2. Material initial moisture content 15%, final moisture to ensure below 0.5-1%,which is the preferred products of the cement plant, GGBS and dry mortar production line.

3. The sand dryer thermal efficiency is as high as 80%, at the same time, the total power is low, 40% energy saving.

4. The fuel can be coal, oil, or gas, and it can dry granular materials, aggregates, and powdery materials below 20-40mm.

5. The sand dryer covers an area of about 40% lower than single drum dryer and civil investment reduced by about 50%.

- PARAMETERS

Model(m) Output(t/h) Coal consumption(kg/t) Power(kw)
Sand Fly ash Mineral slag
Φ2.0×5 12-15 6-7 10-13 10-12 4kw×2
Φ2.2×5 14-18 7-9 12-15 10-12 5.5kw×2
Φ2.5×5 23-28 10-13 20-22 10-12 5.5kw×4
Φ2.8×6 30-35 15-18 25-30 10-12 5.5kw×4
Φ3.0×6 35-40 18-20 32-35 8-10 7.5kw×4
Φ3.0×7 40-45 20-25 35-40 8-10 7.5kw×4
Φ3.2×7 45-50 25-30 40-45 8-10 11kw×4
Φ3.2×8 50-55 30-35 45-50 8-10 11kw×4
Φ3.6×8 60-70 35-40 60-65 6-8 15kw×4
Φ3.8×9 70-80 40-45 70-75 6-8 15kw×4
Φ4.0×10 90-100 45-50 80-90 6-8 18.5kw×4
Φ4.2×8.5 80-100 45-60 80-90 6-8 18.5kw×4

Leave Us A Message

Custom design production solutions? Get a quote? Get product details? Leave us a message and we'll get back to you within 24 hours.