Focus on heavy equipment
When we buy a dryer, we should choose suitable drying equipment according to the characteristics of the materials to be dried. When choosing equipment for drying sand, many users tend to prefer a three-pass sand dryer. So, compared with ordinary single-cylinder dryer equipment, what are the advantages of the three-pass sand dryer?
1. The three-pass sand dryer is made up of three concentric cylinders embedded in each other. In the drying process of sand, two different drying methods, downstream and counter-current, are used to carry out three return circulation drying processes. It is suitable for all kinds of granular materials, and meets the basic requirements of material drying, including a series of material processing processes such as feeding, conveying, dispersing, heat transfer, and discharging, and can also meet the sand processing capacity, dehydration capacity, drying capacity, etc. Basic requirements for the quality of the finished product.
2. When using the three-pass sand dryer to dry the sand, the sand is dried by the inner cylinder, the middle cylinder and the outer cylinder at different temperatures, so that the dried materials are highly dispersed in the hot air, and the critical Low moisture content and fast drying. And the same is convection drying, the drying method is different, the critical moisture content is also different, so the drying rate is also different. In short, the three-pass sand dryer has higher drying efficiency when drying sand.
3. Since the three-layer dryer has better thermal insulation than the traditional rotary drum dryer, the thermal energy resources can be better utilized when the sand is dried, which further reduces the loss of energy. , has the characteristics of high heat source utilization and low energy consumption.
In addition, compared with the single-cylinder drying equipment, the three-pass sand dryer has a small footprint, is faster and more convenient to use, and greatly saves the investment of manpower, material resources and financial resources. It is the best choice for low investment and high efficiency.
Limestone dryer can be used to dry limestone, clay, slag, carbide slag, water slag and other materials. The material enters the dryer through the conveying equipment, and the heat carrier contacts the material in reverse. The water in the material is evap
ETP sludge is difficult to use industrially due to its high moisture content and low calorific value. It also contains high concentrations of chemicals and heavy metals, posing a significant risk of environmental pollution. In response to the current stat
Aggregate drying requires an aggregate dryer, the most common of which is a drum dryer, which consists of a drying drum, a heat source device, a conveying device, a screener, etc. After the aggregate enters the drying drum from the feed end, the aggregate
As an expert in rotary dryers, Zhengzhou Jiutian has carried out technical upgrades and innovative designs for gypsum dryers based on the characteristics of gypsum: multi-stage hot air circulation and waste heat recovery technology are used to better redu