Focus on heavy equipment
The petroleum coke dryer mainly dries the material by direct heat transfer. The equipment drum is equipped with a special crushing device, which can disperse the bulk material into fine particles, increase the contact area between the material and the high-temperature hot air, thereby reducing the drying time of the equipment. So, what are the advantages of Jiutian petroleum coke dryer?

1. The equipment has good sealing performance
The common equipment of petroleum coke dryer is tumble dryer, and the dust overflows in an effective way during the operation of the equipment.
2. Various heat source options
The equipment manufacturing technology is mature, and there are many choices of heat sources. Clean heating units such as steam, natural gas, biomass pellets and other clean fuels can be used.
3. Configure dust removal equipment
A dust removal device is installed on the production line of the petroleum coke dryer, which can purify the waste gas and dust generated during the production process and discharge it.
4. The petroleum coke dryer production line is fully equipped
Clean heat source devices, tumble dryers, conveyors, dust removal equipment, power distribution cabinets and other accessories. Only when the accessories of the equipment cooperate with each other can the drying effect of the material be good.
If you are interested in our petroleum coke dryer, please feel free to contact us.
Silica sand if mainly composed of SiO2, which has good wear resistance, fire resistance, and insulation properties. It is widely used in glass, casting, ceramics, refractory materials, metallurgy and other industries. However, natural silica sand contains
Nickel ore is an important raw material for producing batteries and stainless steel. However, with the resources of sulfide nickel ore decreasing, currently the nickel ore primarily comes from laterite nickel ore. Laterite nickel ore has a high moisture c
The rotary sludge drying system is specifically designed for sludge with high moisture content, high viscosity, and low calorific value, it is usually used in sludge treatment in municipal, dyeing, and papermaking industries. After dewatering by a filter
Aggregates are used for skeleton and filling in concrete and mortar, including fine aggregates with a diameter of 0.16-5mm and coarse aggregates with a diameter bigger than 5mm. The sand, gravel, and crushed stone commonly found in our daily lives can all