Focus on heavy equipment
Fluorite is a very important non-metallic mineral raw material with a wide range of industrial uses: In the metallurgical industry, fluorite is mainly used for steelmaking, ironmaking, casting and smelting. In the fluorine chemical industry, fluorite is used to produce hydrofluoric acid. In the building materials industry, fluorite is widely used in the production process of cement, glass, cast stone and ceramics.
Fluorite dryer is mainly used to dry fluorite powder after flotation. Using dryer to dry fluorite powder can save 30% of energy consumption. The dried fluorite powder has good quality, large output and high added value. The wet material is fed into the hopper through a belt conveyor or bucket elevator, and enters the dryer through the feeding pipe. The cylinder is in an inclined rotating cylinder shape. The material moves in the cylinder under the action of gravity, and directly or indirectly obtains heat from the heat carrier to achieve drying. The inner wall of the cylinder is equipped with a lifting plate to increase the contact area between the material and the airflow and improve the drying rate.
Fluorite dryer performance advantages:
High efficiency and energy saving: adopts downstream drying method, high thermal efficiency and low energy consumption.
Uniform drying: the residence time of the material in the drying drum can be controlled to avoid local overheating or uneven drying.
Strong adaptability: suitable for processing materials with high moisture content, and has good adaptability to different types of fluorite ores.
Zhengzhou Jiutian provides a full set of fluorite deep processing production lines, if you are interested in our equipment, please contact us.
Silica sand if mainly composed of SiO2, which has good wear resistance, fire resistance, and insulation properties. It is widely used in glass, casting, ceramics, refractory materials, metallurgy and other industries. However, natural silica sand contains
Nickel ore is an important raw material for producing batteries and stainless steel. However, with the resources of sulfide nickel ore decreasing, currently the nickel ore primarily comes from laterite nickel ore. Laterite nickel ore has a high moisture c
The rotary sludge drying system is specifically designed for sludge with high moisture content, high viscosity, and low calorific value, it is usually used in sludge treatment in municipal, dyeing, and papermaking industries. After dewatering by a filter
Aggregates are used for skeleton and filling in concrete and mortar, including fine aggregates with a diameter of 0.16-5mm and coarse aggregates with a diameter bigger than 5mm. The sand, gravel, and crushed stone commonly found in our daily lives can all