Focus on heavy equipment
Gypsum is a widely distributed mineral that plays an important role in the construction industry, agriculture and other fields. Gypsum drying can optimize physical properties, facilitate molding and processing, and prevent deterioration. The main uses of dried gypsum are as follows:
Gypsum is a retarder for silicate cement. It slows down the hydration of C₃A minerals by forming calcium sulfonate, thereby regulating the setting time and preventing it from hardening too quickly. After grinding and processing, gypsum can be formed into powdered gypsum powder, which is used for building plastering, sculpture, and decorative lines. Gypsum can also be used to make gypsum boards, which are widely used in lightweight decorative materials such as building partitions and ceilings.
However, traditional gypsum drying technology has many limitations, such as low drying efficiency leading to long production cycle, high energy consumption and increased production costs, uneven temperature control that easily causes cracking or uneven strength of gypsum boards, large equipment footprint and complex operation, sensitive to environmental humidity and easy to be affected, and difficult to accurately adapt to different qualities of gypsum raw materials.
As an expert in rotary dryers, Zhengzhou Jiutian has carried out technical upgrades and innovative designs for gypsum dryers based on the characteristics of gypsum: multi-stage hot air circulation and waste heat recovery technology are used to better reduce energy consumption, and energy costs are reduced by 30% compared to traditional dryers; a three-stage dust treatment process is used to reduce exhaust emissions to standards; and the design of a fully automatic intelligent production line reduces labor costs.
Jiutian gypsum dryer has significant value: cost reduction, energy saving and maintenance cost reduction; efficiency improvement, fast drying and quality improvement; environmental protection, green energy and emission reduction; intelligent, easy to operate and automated. Welcome to consult now to get a customized solution and quotation for gypsum dryer!
Silica sand if mainly composed of SiO2, which has good wear resistance, fire resistance, and insulation properties. It is widely used in glass, casting, ceramics, refractory materials, metallurgy and other industries. However, natural silica sand contains
Nickel ore is an important raw material for producing batteries and stainless steel. However, with the resources of sulfide nickel ore decreasing, currently the nickel ore primarily comes from laterite nickel ore. Laterite nickel ore has a high moisture c
The rotary sludge drying system is specifically designed for sludge with high moisture content, high viscosity, and low calorific value, it is usually used in sludge treatment in municipal, dyeing, and papermaking industries. After dewatering by a filter
Aggregates are used for skeleton and filling in concrete and mortar, including fine aggregates with a diameter of 0.16-5mm and coarse aggregates with a diameter bigger than 5mm. The sand, gravel, and crushed stone commonly found in our daily lives can all