Focus on heavy equipment
When the drying equipment is used daily, its maintenance should be enhanced, so that it will bring convenience to our use and improve its working efficiency. So what are the maintenance methods of the river sand dryer?
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil is required to be clean, and it must be well carried out. seal.
2. The newly installed tires are prone to loosening and should be checked frequently.
3. Pay attention to whether the work of each part of the machine is normal.
4. Pay attention to check the wear degree of the wear-resistant parts, and pay attention to replace the worn parts at any time.
5. On the bottom frame plane of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters materials that cannot be broken, so as to avoid serious accidents.
6. When the oil temperature of the bearing rises, stop immediately to check the cause and troubleshoot it.
7. If there is an impact sound when the rotating gear is running, stop it immediately to check and troubleshoot it.
The daily maintenance of the river sand dryer is essential. The river sand dryer manufacturer can only maintain and maintain it on a regular basis, so as to reduce the failure rate of the equipment and prolong its service life.
Limestone dryer can be used to dry limestone, clay, slag, carbide slag, water slag and other materials. The material enters the dryer through the conveying equipment, and the heat carrier contacts the material in reverse. The water in the material is evap
ETP sludge is difficult to use industrially due to its high moisture content and low calorific value. It also contains high concentrations of chemicals and heavy metals, posing a significant risk of environmental pollution. In response to the current stat
Aggregate drying requires an aggregate dryer, the most common of which is a drum dryer, which consists of a drying drum, a heat source device, a conveying device, a screener, etc. After the aggregate enters the drying drum from the feed end, the aggregate
As an expert in rotary dryers, Zhengzhou Jiutian has carried out technical upgrades and innovative designs for gypsum dryers based on the characteristics of gypsum: multi-stage hot air circulation and waste heat recovery technology are used to better redu